Measured wrap planning

Tumbler wrap calculator

Enter the blank’s outside diameter at the print boundary and the printable height measured along the cup wall. Choose Tapered when the upper and lower diameters differ.

Shape Straight creates a rectangular wrap. Tapered models a straight-sided blank as an annular sector. Unit Changing units converts the values already entered. Diameter Measure straight across the blank, outer wall to outer wall, at the upper print limit—not around the cup. Printable side height Measure along the cup wall from the upper print limit to the lower print limit. On a tapered blank, use the slanted wall distance. Seam overlap Optional extra width at the closing seam. Artwork bleed per edge Straight-wrap width and height include this amount on each edge. Tapered-sector dimensions report it separately.

Wrap starting point

Wrap result

Rectangle

Calculated from the entered measurements.

Wrap width: —
Wrap height: —
Cup circumference: —
Allowances: —

Paper test first. Before sublimating, make an actual-size paper test in your design workflow and check the seam, printable wall, lip, base, ridges, and handle clearance.

Need an actual-size SVG or print-test PDF? Open the full calculator on PressMeasure.